Hydronix TW-1812-50 RO Membrane, 1.8″ × 11.68″
Part number: TW-1812-50
Manufacturer: Hydronix (TW Series)
Hydronix TW-1812-50 is a HYDRON-series residential/light-commercial reverse osmosis membrane element, 1.8" diameter x 11.68" length, made from polyamide compound. Manufacturer literature rates it at 50 GPD (0.19 m³/d) average permeated flow at 60 psi applied pressure, with a 97.5% stable rejection rate, for household water purification, laboratory, hydroponics and other small reverse-osmosis-system applications. FilterBridge Supply takes commercial and public-agency requests for this part by part number.
Specifications
| Spec | Value |
|---|---|
| Part number | TW-1812-50 |
| Manufacturer | Hydronix |
| Series | TW |
| Product type | RO Membrane |
| Diameter | 1.8″ |
| Length | 11.68″ |
| Filter media | Polyamide compound (thin-film composite) |
| Average permeate flow | 50 GPD (0.19 m³/d) at 60 psi applied pressure |
| Units per case | 25 |
| Certification (material requirements) | This Membrane is Tested and Certified by NSF International against NSF / ANSI Standard 58 for material requirements only. |
Specifications are transcribed from the manufacturer's published data. Nothing is inferred, rounded or converted.
What to check before you order
This page does not say this part works in any particular housing or swaps for any other brand's part. Before ordering, compare these against what you use today:
- Size. This part is 1.8″ × 11.68″ (diameter × length). Check your housing's cartridge size or the label on the part you use today.
- Media. Polyamide compound (thin-film composite). If the part you use now has a different media, flag it so the change is a conscious one.
- Certification. The manufacturer's statement is shown word for word in the specification table. If your specification needs a certification for this exact part number, put it in your request.
Our spec comparison guide walks through each item.
Where it's used
Household water purification, laboratory, hydroponics and other small reverse osmosis systems. Whether this part suits a particular system depends on the housing, the duty and the water. Send us the application and we'll tell you whether this format is the right one, rather than assuming it is.
Buying for a water district or city?
Send the spec or a recent PO line and we'll work from your number. Public-agency buyers can see how we handle quote requests and vendor lists on our municipal purchasing page.
FAQ
- What size is TW-1812-50?
- 1.8″ × 11.68″ (diameter × length), as published by the manufacturer.
- What is TW-1812-50 made of?
- Polyamide compound (thin-film composite).
- How many come in a case?
- 25.
- Is TW-1812-50 NSF certified?
- This Membrane is Tested and Certified by NSF International against NSF / ANSI Standard 58 for material requirements only.
- Will TW-1812-50 fit my housing or replace another brand's part?
- This page doesn't say that. Send us your housing model or the part number you use now, and we'll tell you what we can supply against it. A person reviews every request.
How a quote works
Send us the part number and we'll tell you what we can supply against it. We check your part number against the manufacturer's published specs and confirm fit with our supplier before you order.
Every order is quoted individually. We confirm each quote with the manufacturer before we send it to you. We don't publish a price list. Pricing comes on a written quote for your part numbers and quantities.
Request a written quote with your part numbers, the quantity and the delivery address. We'll send a written quote. If you'd like to proceed, reply to confirm. We can send the manufacturer data sheet for any part we quote.
Request a quote
Send us the part number and we'll tell you what we can supply against it.
- Request a quote: part number, number of cases, delivery location.
- Replacing a different part number? Send it and we'll tell you what we can supply.
- Build an RFQ
- Public agencies: municipal purchasing