Pentek P5 Spun Polypropylene Sediment Cartridge, 5 Micron (155014-43)
Part number: P5
Manufacturer: Pentair (Pentek)
The P5 is one of the most widely specified 10-inch sediment cartridges: spun polypropylene fibers sintered into a coreless gradient-density matrix, so the outer layers take coarse dirt and the inner layers finish at 5 microns. Pentair publishes a low 0.2 psi initial pressure drop at 5 gpm.
Specifications
| Spec | Value |
|---|---|
| Model / part # | P5 / 155014-43 |
| Max dimensions | 2.38″ × 9.88″ (60.5 × 251 mm) |
| Micron | 5 µm nominal |
| Initial ΔP | 0.2 psi @ 5 gpm |
| Media | 100% polypropylene fibers, gradient density, coreless (sintered) |
| Temperature | 40–145 °F (4.4–62.8 °C) |
| Certification | Certifications available on request |
Specs are transcribed from manufacturer data; nothing inferred.
Where it's used
- RO pre-filtration
- Post-filter after GAC tanks
- Standard 10″ housings in kitchens and light-commercial lines
Buying in bulk
Price: By quote — request a bulk quote below.
Before you order
This page doesn't claim this part fits a specific housing or replaces another brand's part. Send your housing model and required certification and we'll check published specs before quoting.
FilterBridge Supply sells this part by part number; this page makes no authorized-dealer or brand-partnership claim.
Quotes within one business day.