Skip to content

Hydronix SDC-25-2001 Sediment Depth Cartridge, 2.5″ × 20″, 1 Micron

Part number: SDC-25-2001
Manufacturer: Hydronix (SDC Series)

Hydronix SDC-25-2001 is a 2.5" × 20" sediment depth cartridge with a 1-micron rating, made from 100% pure polypropylene. Manufacturer literature lists the SDC series as a pre-filter for DI and RO water filtration systems. FilterBridge Supply takes commercial and public-agency requests for this part by part number.

Specifications

SpecValue
Part numberSDC-25-2001
ManufacturerHydronix
SeriesSDC
Product typeSediment Depth
Diameter2.5″
Length20″
Micron rating1 micron
Units per case20
Rated flow rateNot published by manufacturer
Maximum operating temperatureNot published by manufacturer
Certification (material requirements)This filter cartridge is tested and certified by NSF International to NSF / ANSI Standard 42 for material requirements only and NSF / ANSI / CAN 61, NSF / ANSI 372.
Material complianceMade with FDA CFR 21 approved material.

Specifications are transcribed from the manufacturer's published data. Nothing is inferred, rounded or converted.

What to check before you order

This page does not say this part works in any particular housing or swaps for any other brand's part. Before ordering, compare these against what you use today:

  1. Size. This part is 2.5″ × 20″ (diameter × length). Check your housing's cartridge size or the label on the part you use today.
  2. Micron rating. 1 Micron. If your specification calls for an absolute rating or a particular rating type, say so in your request.
  3. End style and seal. The manufacturer data we hold does not list end caps or gaskets for this part. If your housing needs a spring seat, a fin end or a gasket, tell us.
  4. Certification. The manufacturer's statement is shown word for word in the specification table. If your specification needs a certification for this exact part number, put it in your request.

Our spec comparison guide walks through each item.

Where it's used

RO pre-filtration, post-filtration behind granular carbon, ice machines and beverage. Whether this part suits a particular system depends on the housing, the duty and the water. Send us the application and we'll tell you whether this format is the right one, rather than assuming it is.

Buying for a water district or city?

Send the spec or a recent PO line and we'll work from your number. Public-agency buyers can see how we handle quote requests and vendor lists on our municipal purchasing page.

FAQ

What size is SDC-25-2001?
2.5″ × 20″ (diameter × length), as published by the manufacturer.
What micron rating does SDC-25-2001 have?
1 Micron. If your specification requires a nominal or an absolute rating, tell us in your request.
How many come in a case?
20.
Is SDC-25-2001 NSF certified?
This filter cartridge is tested and certified by NSF International to NSF / ANSI Standard 42 for material requirements only and NSF / ANSI / CAN 61, NSF / ANSI 372. Made with FDA CFR 21 approved material.
Will SDC-25-2001 fit my housing or replace another brand's part?
This page doesn't say that. Send us your housing model or the part number you use now, and we'll tell you what we can supply against it. A person reviews every request.

How a quote works

Send us the part number and we'll tell you what we can supply against it. We check your part number against the manufacturer's published specs and confirm fit with our supplier before you order.

Every order is quoted individually. We confirm each quote with the manufacturer before we send it to you. We don't publish a price list. Pricing comes on a written quote for your part numbers and quantities.

Request a written quote with your part numbers, the quantity and the delivery address. We'll send a written quote. If you'd like to proceed, reply to confirm. We can send the manufacturer data sheet for any part we quote.

Request a quote

Send us the part number and we'll tell you what we can supply against it.

More part pages

Request a Quote