Pentek PCF1-10MB Deionization Cartridge, 2.67″ × 9.75″
Part number: PCF1-10MB
Manufacturer: Pentek (PCF Series)
Pentek PCF1-10MB is a 2.67" × 9.75" mixed-bed deionization resin cartridge (semiconductor-grade, low-TOC resin). DI resin cartridges are rated by capacity, not micron size, and no capacity figure is published on the source cited below. FilterBridge Supply takes commercial and public-agency requests for this part by part number.
Specifications
| Spec | Value |
|---|---|
| Part number | PCF1-10MB |
| Manufacturer | Pentek |
| Series | PCF |
| Product type | Deionization / High Purity |
| Diameter | 2.67″ |
| Length | 9.75″ |
| Filter media | Mixed-bed deionization resin (semiconductor-grade, low-TOC) |
| Rated flow rate | Not published by manufacturer |
| Maximum operating temperature | Not published by manufacturer |
| Certification | Not shown here until confirmed for this exact part number (see FAQ) |
Specifications are transcribed from the manufacturer's published data. Nothing is inferred, rounded or converted.
What to check before you order
This page does not say this part works in any particular housing or swaps for any other brand's part. Before ordering, compare these against what you use today:
- Size. This part is 2.67″ × 9.75″ (diameter × length). Check your housing's cartridge size or the label on the part you use today.
- Media. Mixed-bed deionization resin (semiconductor-grade, low-TOC). If the part you use now has a different media, flag it so the change is a conscious one.
- End style and seal. The manufacturer data we hold does not list end caps or gaskets for this part. If your housing needs a spring seat, a fin end or a gasket, tell us.
- Certification. If your specification requires NSF/ANSI 61 or 42, put that in your request.
Our spec comparison guide walks through each item.
Where it's used
Washing and rinsing, spot-free water, scale control, final polishing. Whether this part suits a particular system depends on the housing, the duty and the water. Send us the application and we'll tell you whether this format is the right one, rather than assuming it is.
Buying for a water district or city?
Send the spec or a recent PO line and we'll work from your number. Public-agency buyers can see how we handle quote requests and vendor lists on our municipal purchasing page.
FAQ
- What size is PCF1-10MB?
- 2.67″ × 9.75″ (diameter × length), as published by the manufacturer.
- What is PCF1-10MB made of?
- Mixed-bed deionization resin (semiconductor-grade, low-TOC).
- Is PCF1-10MB NSF certified?
- Tell us which standard your specification requires. We check certification against the manufacturer's listing for the exact part number, and we don't assume it from the product series.
- Will PCF1-10MB fit my housing or replace another brand's part?
- This page doesn't say that. Send us your housing model or the part number you use now, and we'll tell you what we can supply against it. A person reviews every request.
How a quote works
Send us the part number and we'll tell you what we can supply against it. We check your part number against the manufacturer's published specs and confirm fit with our supplier before you order.
Every order is quoted individually. We confirm each quote with the manufacturer before we send it to you. We don't publish a price list. Pricing comes on a written quote for your part numbers and quantities.
Request a written quote with your part numbers, the quantity and the delivery address. We'll send a written quote. If you'd like to proceed, reply to confirm. We can send the manufacturer data sheet for any part we quote.
Request a quote
Send us the part number and we'll tell you what we can supply against it.
- Request a quote: part number, number of cases, delivery location.
- Replacing a different part number? Send it and we'll tell you what we can supply.
- Build an RFQ
- Public agencies: municipal purchasing