Skip to content

Equivalent specs

Pentek WP5BB20P equivalent specs: SWC-45-2005

Published specifications for the Pentek WP5BB20P next to the SWC-45-2005 we supply. This compares published data only; we have not physically tested the pair.

Part you have

WP5BB20P(355223-43)

Pentek · String-wound polypropylene cartridge, 4.5″ × 20″, 5 micron

Part with matching published specs

SWC-45-2005

String-wound polypropylene cartridge, 4.5″ × 20″, 5 micron

Published specifications for WP5BB20P and SWC-45-2005
SpecificationWP5BB20PSWC-45-2005
Size4.5″ × 20″4.5″ × 20″
Micron rating5 µm5 µm
MediaPolypropylene cordPolypropylene cord on a polypropylene core
Temperature40–165 °F40–165 °F
Initial pressure drop<6 psi at 40 gpmNot published
Units per caseNot published6
CertificationNot publishedNSF/ANSI/CAN 61 (manufacturer's NSF listing C0600944 covers this series)

About this cartridge type

String-wound cartridges are built by winding polypropylene cord around a rigid core, which gives a deep, open structure that holds a lot of sand, silt, rust and scale before pressure drop climbs. They are a common first stage ahead of carbon, UV, softeners and RO. The SWC series data sheet suggests changing out at 10–15 psig differential pressure, with 30 psig as the dirty maximum. Before you switch, compare the end style and gasket your housing uses, check the flow per cartridge against the published pressure-drop figures, and tell us any certification your specification calls for.

Where these specs come from

Status: Specifications checked (published data only; not physically tested)

Before you order

  • Confirm your housing's cartridge length, diameter and end style before ordering. We check published specs; we have not physically tested this pairing.
  • Pressure drop at flow is published for the Pentek part only.
  • If your specification requires a certification, tell us which one; we confirm it against the listing for the exact part number.

Pentek and WP5BB20P are trademarks or part numbers of their respective owners, used here only to identify the part being compared. FilterBridge Supply is not affiliated with or endorsed by Pentek.

Request a Quote