Skip to content

Equivalent specs

Pentek EPM-20BB equivalent specs: CB-45-2010

Published specifications for the Pentek EPM-20BB next to the CB-45-2010 we supply. This compares published data only; we have not physically tested the pair.

Part you have

EPM-20BB(155783-43)

Pentek · Carbon block cartridge, 4.63″ × 20.065″, 10 micron

Part with matching published specs

CB-45-2010

Coconut shell carbon block, 4.5″ × 20″, 10 micron

Published specifications for EPM-20BB and CB-45-2010
SpecificationEPM-20BBCB-45-2010
Size4.63″ × 20.065″ (maximum)4.5″ × 20″Published OD differs
Micron rating10 µm nominal10 µm nominal
MediaBonded powdered activated carbonCoconut shell activated carbon
Temperature40–180 °F40–180 °F
Initial pressure drop1.0 psi at 4.0 gpm4.5 psid at 8.0 gpm
Chlorine taste and odor capacity>30,000 gal at 4 gpm26,000 gal at 8.0 gpm

About this cartridge type

Carbon block cartridges are bonded activated carbon formed into a solid tube, used to reduce chlorine taste and odor while also trapping fine particles. The CB series uses coconut shell carbon with polypropylene end caps and a neoprene gasket, rated 40–180 °F. Before you switch, compare the published outside diameters, the end gasket style your housing uses, and the chlorine capacity at your flow rate.

Where these specs come from

Status: Specifications checked (published data only; not physically tested)

  • Pentek EPM series spec sheet (checked 2026-11-03)
  • CB series manufacturer data sheet (checked 2026-11-03)
  • Manufacturer's cross-over sheet listing this pairing (received Sept 8, 2026) (checked 2026-11-03)

Before you order

  • Confirm your housing's cartridge length, diameter and end style before ordering. We check published specs; we have not physically tested this pairing.
  • Published outside diameters differ (4.63″ vs 4.5″).
  • Pressure drop and chlorine capacity are published at different flow rates.
  • If your specification requires a certification, tell us which one; we confirm it against the listing for the exact part number.

Pentek and EPM-20BB are trademarks or part numbers of their respective owners, used here only to identify the part being compared. FilterBridge Supply is not affiliated with or endorsed by Pentek.

Request a Quote