Equivalent specs
Pentek DGD-5005 equivalent specs: SDC-45-1005
Published specifications for the Pentek DGD-5005 next to the SDC-45-1005 we supply. This compares published data only; we have not physically tested the pair.
Part you have
DGD-5005(155357-43)
Pentek · Dual-gradient polypropylene depth cartridge, 4.50″ × 9.88″, 5 micron
Part with matching published specs
SDC-45-1005
Graded-density polypropylene depth cartridge, 4.5″ × 9 7/8″, 5 micron
| Specification | DGD-5005 | SDC-45-1005 |
|---|---|---|
| Size | 4.50″ × 9.88″ | 4.5″ × 9 7/8″ |
| Micron rating | 5 µm | 5 µm |
| Construction | Dual-gradient depth, 100% polypropylene | Four-layer graded density, 100% polypropyleneDifferent depth construction |
| Temperature | 40–145 °F | 40–145 °F |
| Initial pressure drop | <1 psi at 10 gpm | Not published |
| Units per case | Not published | 12 |
| Certification | Not published | NSF/ANSI/CAN 61 (manufacturer's NSF listing C0600944 covers this series) |
About this cartridge type
Depth cartridges trap particles through the full thickness of the wall instead of on the surface. The SDC series uses four layers of graded-density polypropylene with outside-in flow, so the outer layers take the larger particles and the inner layers handle the finer ones. They are a common pre-filter for carbon, DI and RO stages. Before you switch, compare the end style your housing uses, check the flow per cartridge against the published pressure-drop figures, and tell us any certification your specification calls for.
Where these specs come from
Status: Specifications checked (published data only; not physically tested)
- Pentek DGD series spec sheet (checked 2026-11-03)
- SDC series manufacturer data sheet (checked 2026-11-03)
Before you order
- Confirm your housing's cartridge length, diameter and end style before ordering. We check published specs; we have not physically tested this pairing.
- The two cartridges use different depth-media construction.
- If your specification requires a certification, tell us which one; we confirm it against the listing for the exact part number.
Pentek and DGD-5005 are trademarks or part numbers of their respective owners, used here only to identify the part being compared. FilterBridge Supply is not affiliated with or endorsed by Pentek.