Skip to content

Equivalent specs

Fil-Trek UF-5-60-EP equivalent specs: HHFC60-5

Published specifications for the Fil-Trek UF-5-60-EP next to the HHFC60-5 we supply. This compares published data only; we have not physically tested the pair.

Part you have

UF-5-60-EP

Fil-Trek · Ultra Flow pleated high-flow cartridge, 6″ OD × 60″, 5 micron, EPDM seal

Part with matching published specs

HHFC60-5

Pleated polypropylene high-flow cartridge, 6″ × 60″, 5 micron

Published specifications for UF-5-60-EP and HHFC60-5
SpecificationUF-5-60-EPHHFC60-5
Length60″60″
Outside diameter6″6″
Micron rating5 µm absolute5 µm nominalDifferent rating basis
MediaPleated polypropylenePleated polypropylene
Flow directionInside to outsideInside to outside
SealEPDMEPDM standard
Flow per elementUp to 300 gpmUp to 500 gpm (max)
Change-out differential15 psid15 psid
CertificationNot publishedCertifications available on request

About this cartridge type

Large-diameter high-flow cartridges (about 6-inch OD) use inside-to-outside flow through pleated polypropylene, so one element carries the flow of many 2.5-inch cartridges and holds the dirt inside during change-out. The HHFC series has a handle for push/pull installation, an O-ring seal and EPDM gaskets as standard. Before you switch, compare length, micron rating type (absolute vs nominal), seal material and your vessel's element style.

Where these specs come from

Status: Specifications checked (published data only; not physically tested)

  • Fil-Trek Ultra Flow (UF) product page (checked 2026-11-03)
  • HHFC series manufacturer data sheet (checked 2026-11-03)
  • Manufacturer's written confirmation of this pairing (email, Oct 22 and Nov 2, 2026) (checked 2026-11-03)

Before you order

  • Confirm your housing's cartridge length, diameter and end style before ordering. We check published specs; we have not physically tested this pairing.
  • Published micron ratings use different bases: the other part is rated absolute, the part we supply is rated nominal.

Fil-Trek and UF-5-60-EP are trademarks or part numbers of their respective owners, used here only to identify the part being compared. FilterBridge Supply is not affiliated with or endorsed by Fil-Trek.

Request a Quote